1. Initial value of low-order contact resistance: maximum 30mΩ;

2. Change value: Maximum 20mΩ

3. Insulation resistance: (1). Power terminal: minimum 1000MΩ; (2) Signal terminal: minimum 100MΩ

4. Withstand voltage: (1) Power terminal: average 1000V AC; (2) Signal terminal: average 500V AC

5. Insertion force: (1) Power terminal: Max. 8N(800gf) /Pin; (2) Signal terminal: maximum 3N(300gf)Pin

6. Pullout power: (1) Power terminal: minimum 2N(200gf) /Pin; (2) Signal terminal: minimum 0.1N(10gf)Pin

7.Pin Pin retention: minimum 0.8Kgf /Pin after high temperature

8. Holding force of signal end: minimum 0.8Kgf /Pin after high temperature

9.CAP retention: (1) Min: 100g/f Max; (2) Maximum: 1Kg/f

10. Contact holding force: 4.9N(minimum) Used to test the terminal holding force after high temperature

11. Crimping terminal holding force (TPA key is added for wire end Housing) : minimum PIN 9.8N/PIN of signal terminal

12. Crimping terminal holding force (Housing rubber shell) : 25.4N /PIN minimum power terminal

13. Crimping holding force (terminal line); (1) Line size :18, holding force :8.9; (2) Line size :28, holding force :57